2006461

/en-us/search

FiberworksD4_V2

Products

Total hit count:

See full result...

Brands

Brand names

Articles

Number of articles found:

SFP+ BiDi, 10 GE, DDM, SM, 60kmTx/Rx=1330/1270nm, 21dB, LC, Cisco

The SFP-10GE-BX transceiver family are small form factor pluggable modules for bi-directional serial optical data communications such as 10GBASE Ethernet over a single optical fiber. The modules are compliant to the SFP+ MSA and are hot pluggable. Digital diagnostic functions are available via an I2C serial bus specified in the SFP MSA SFF-8472. The modules meet the requirements of the IEEE 802.3 10GBASE-BX Ethernet standard and are suitable for interconnections in 10G Ethernet environments.

SFP-10GE-BX uses 1270 nm and 1330 nm wavelengths for bi-directional transmission on a single fiber

APPLICATIONS
• 10GBASE-BX at 10.3125 Gb/s
• 10GBASE-BX at 9.953 Gb/s

FEATURES
• Up to 11.1 Gbps Data Links
• Single Mode LC Receptacle Bi-directional Transceiver
• Up to 60km transmission on SMF
• Power dissipation <1.0W
• 1330nm DFB laser and 1270nm APD receiver
• Digital Diagnostic monitoring
• Compliant with SFP+ MSA with simplex LC connector
• Operating case temperature:0~+70ºC

SFP+ BiDi, 10 GE, DDM, SM, 60km Tx/Rx=1330/1270nm, 21dB, LC, Cisco

Accessories

Snor SM SPX SC/APC-LC/UPC xx m

Snor SM SPX LC/UPC-SC/UPC xx m

Snor SM SPX LC/UPC-LC/UPC xx m

Snor SM SPX E2000/UPC-LC/UPC xx m

Alternatives

Articles

Number of articles found:

Last ned vår WDM guide →

SFP+ BiDi, 10 GE, DDM, SM, 60km

Tx/Rx=1330/1270nm, 21dB, LC, Cisco

Product nr: SFP-10GE-BX60D-32-C

Alt. item no.:SFP-10G-BX60D-I

Product

OBS! Denne transceiveren har APD-mottaker og må ikke loopes uten dempeledd!

APD står for Avalanche Photo Diode og er en type mottaker med aktiv forsterkning av signalet. Dette gjør at den er veldig følsom men det er dermed også begrenset hvor mye lys den tåler uten å bli ødelagt. Det er derfor viktig at man ikke looper den direkte fra sender til mottaker uten å ha tilstrekkelig demping for eksempel i form av et 10-15 dB dempeledd eller 40-60 km fiber.

Hvis man har hatt for sterkt lys inn på mottakeren vil man få problemer med bitfeil eller å få link i det hele tatt. Ofte vil det også se ut på Rx Power i DDM-dataene som at det kommer lys inn på mottakeren selv om den er koblet fra.

Les mer om APD-mottakere Show less...

Finner du ikke kodingen du er på jakt etter?

Ta kontakt med vår produktsjef.

Det kan hende vi likevel kan levere den.

Du kan også lese mer om transceiverkompatibilitet i denne artikkelen.

Description

SFP-10GE-BX uses 1270 nm and 1330 nm wavelengths for bi-directional transmission on a single fiber

APPLICATIONS
• 10GBASE-BX at 10.3125 Gb/s
• 10GBASE-BX at 9.953 Gb/s

Technical info

Product information

Form factor	SFP+
Protocol / bit rate	10 Gigabit Ethernet 10G Fibre Channel SDH STM-64 OTN/G.709/G.sup43 OTU2(e) 3G-SDI / SMPTE video 6G-SDI / SMPTE video CPRI/OBSAI 1.228 - 3.072 Gbps CPRI/OBSAI 4.915 - 9.830 Gbps
Media type	Single fiber
Reach (dB)	21
Reach (km)	60
Wavelength (nm)	1270/1330
Laser Type	DFB
Detector type	APD
Line Modulation	NRZ
Tx power min. [dBm]	0
Tx power max. [dBm]	+5
Rx sensitity [dBm]	-20
Rx overload limit [dBm]	-7
Compatibility	Cisco
DDM	Yes
Connector	LC Simplex
Safety class	Laser Class 1
Operating temperature range	0°C - +70°C (Standard)
Temperature range, storage	-40°C - +85°C
Customs classification codes	ECCN: 5A991 HS: 8517.62.0090